df 10g 5 m4 n 20 1 5 - 0 9 - 29 1 toshiba diodes f or p rotecting a gainst esd df 10g 5 m 4 n application - esd protection note: this product is designed for protection against electrostatic disch arge (esd) and is not intended for any other purpose, including, but not limited to, voltage regulation. abusolute maximum r atings ( ta = 25 c ) c haracteristic s ymbol r ating u nit electrostatic discharge voltage iec61000 - 4 - 2(contact) iec61000 - 4 - 2( air ) v esd (note 1) 2 3 25 kv peak pulse power ( tp = 8 / 20 s ) p pk 30 w maximum p eak pulse current ( tp = 8 / 20 s ) i pp (note 2 ) 2 a junction te mperature t j 15 0 ? c storage te mperature range t stg ? 55 to 15 0 ? c note1 : according to iec61000 - 4 - 2 note 2 : according to iec61000 - 4 - 5 note 3 :using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly eve n if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings.please design the appropriate reliability upon reviewing the toshiba semiconductor reliability handbook (handling precautions/ derat ing concept and methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). e lectrical c haracteristics ( ta = 25 c ) v rwm : working peak reverse voltage v br : reverse breakdown voltage i br : reverse breakdow n current i r : reverse current v c : clamping voltage i pp : peak pulse current r dyn : dynamic resistance jedec ? jeita ? ? toshiba ? weight: 3.2m g (typ.) dfn10 1:i/o 6:nc 2:i/o 7:nc 3: gnd 8:nc 4:i/o 9:nc 5:i/o 10:nc
df 10g 5 m4 n 20 1 5 - 0 9 - 29 2 c haracteristic s ymbol t est c ondition m in t yp. m ax u nit reverse stand - off vo ltage v rwm D D D 3.6 v reverse breakdown vo ltage v br i br = 1 ma 4 .0 5.0 6.0 v r everse cur rent i r v r wm = 5 .5 v D D 0.1 ? a clamping voltage vc i pp =1a (note1) D 7 .5 D v ? vc i pp =2 a (note1) D 10 15 v ? clamping voltage vc itlp=16a (note2) D 1 7 D v vc itlp=30a (note2) D 2 4 D v dynamic resistance r dyn (note2) D 0.5 D ? total c apacitance c t v r ? 0 v, f ? 1 mhz (note3) D 0.2 0.3 pf note1 based on iec61000 - 4 - 5 8/20 s pulse. note2 tlp parameter: z0 = 50 , tp = 100ns, tr = 300ps, averaging window: t1 = 30 ns to t2 = 60 ns, extraction of dynamic resistance using least squares fit of tlp characteristics between ipp1 = 8a and ipp2 = 16 a. note3 guaranteed by design. marking land pattern dimensions for reference only marking code par t number n 8 df10g 5 m4n equivalent circuit n 8 i/o 1 i/o2 i/o3 i/o4
df 10g 5 m4 n 20 1 5 - 0 9 - 29 3 characteristics curves (note) note: the above characteristics curves are presented for reference o nly and not guaranteed by production test, unless otherwise noted. ta=25 , f = 1mhz total capacitance c t ( pf ) reverse voltage v r (v) vr=0v , ta=2 5 f requency f ( mhz ) total capacitanc e c t ( pf ) c t - v r c t - f reverse current i r ( n a) ta=100 2 5 5 0 7 5 i r - v r reverse voltage v r [ v ] i - v ta=2 5 current i (ma) voltage v (v) 10 8 6 4 2 0 - 2 - 4 - 6 - 8 - 10 - 10 - 8 - 6 - 4 - 2 0 2 4 6 8 10 1 000 100 10 1 0.1 0 .01 0.001 - 4 - 6 - 8 - 10 0 0.1 0.2 0.3 0.4 0.5 1000 10000 0 0.1 0.2 0.3 0.4 0.5 0 1 2 3 4 5 6
df 10g 5 m4 n 20 1 5 - 0 9 - 29 4 note: the above characteristics curves are presented for reference only and not guaranteed by productio n test, unless otherwise noted. tlp tlp voltage (v) tlp current ( a ) z0 = 50 tp = 100 ns tr = 300 ps vc - i pp t a=25 peak pulse current i pp ( a ) clamp voltage v c ( v ) based on iec61000 - 4 - 5 8/20 s pulse. (ed2) tlp voltage (v) tlp current ( a ) fig based on iec61000 - 4 - 5 8/20 s pulse. (ed.2) z0 = 50 tp = 100 ns tr = 300 ps tlp voltage ( v ) tlp current ( a ) 100% 90% 50% 10% 0% i t 8 s 20 s t
df 10g 5 m4 n 20 1 5 - 0 9 - 29 5 note: the above characteristics curves are presented for reference only and not guaranteed by production test, unless ot herwise noted. insertion loss ( s21 ) f requency (g hz) s21 ( db ) t a=25 fig. s21 measurement circuit s21 - f in sg out network analyzer s21
df 10g 5 m4 n 20 1 5 - 0 9 - 29 6 esd clamp waveform (iec61000 - 4 - 2) ( n ote) note: the above characteristics curves are presented for reference only and not guaranteed by production test, unless otherwise noted. fig. iec61000 - 4 - 2 (contact) t (ns) t (ns) - 8kv contact esd v cl (v) v cl - max - peak = - 1 02 v v cl - 30ns - peak = - 2 2 v v cl - 60ns - peak = - 1 2 v 20 0 - 20 - 40 - 60 - 80 - 100 - 120 - 140 +8kv contact esd v cl (v) v cl - max - peak = 1 22 v v cl - 30ns - peak = 2 1 v v cl - 60ns - peak = 12 v 1 40 120 100 80 60 40 20 0 - 20 - 10 0 10 20 30 40 50 60 70 80 90 - 10 0 10 20 30 40 50 60 70 80 90 t (ns) t (ns) - 15 kv contact esd v cl (v) 50 0 - 50 - 100 - 150 - 200 - 250 - 300 - 350 + 15 kv contact esd v cl (v) v cl - max - peak = 13 8 v v cl - 30ns - peak = 40 v v cl - 60ns - peak = 15 v 350 300 250 200 150 100 50 0 - 50 - 10 0 10 20 30 40 50 60 70 80 90 - 10 0 10 20 30 40 50 60 70 80 90 v cl - max - peak = - 1 4 0 v v cl - 30ns - peak = - 32 v v cl - 60ns - peak = - 20 v
df 10g 5 m4 n 20 1 5 - 0 9 - 29 7 packag e dimensions 0.2 sl2
df 10g 5 m4 n 20 1 5 - 0 9 - 29 8 restrictions on product use ? toshiba corporation, and its subsidiaries and affiliates (collectively "toshiba"), reserve the right to make changes to the i nformation in this document, and related hardware, software and systems (collect ively "product") without notice. ? this document and any information herein may not be reproduced without prior written permission from toshiba. even with toshiba's written permission, reproduction is permissible only if reproduction is without alteration/ omission. ? though toshiba works continually to improve product's quality and reliability, product can malfunction or fail. customers are responsible for complying with safety standards and for providing adequate designs and safeguards for their hardware, software and systems which minimize risk and avoid situations in which a malfunction or failure of product could cause loss of human life, bodily injury or damage to property, including data loss or corruption. before customers use the product, create desi gns including the product, or incorporate the product into their own applications, customers must also refer to and comply with (a) the latest versions of all relevant toshiba information, including without limitation, this document, the specifications, th e data sheets and application notes for product and the precautions and conditions set forth in the "toshiba semiconductor reliability handbook" and (b) the instructions for the application with which the product will be used with or for. customers are sol ely responsible for all aspects of their own product design or applications, including but not limited to (a) determining the appropriateness of the use of this produ ct in such design or applications; (b) evaluating and determining the applicability of any information contained in this document, or in charts, diagrams, programs, algorithms, sample application circuits, or any other referenced documents; and (c) validating all operat ing parameters for such designs and applications. toshiba assumes no liabili ty for customers' product design or applications. ? product is neither intended nor warranted for use in equipments or systems that require extraordinarily high levels of quality and/or reliability, and/or a malfunction or failure of which may cause loss o f human life, bodily injury, serious property damage and/or serious public impact ( " unintended use " ). except for specific applications as expressly stated in this document, unintended use includes, without limitation, equipment used in nuclear facilities, equipment used in the aerospace industry, medical equipment, equipment used for automobiles, trains, ships and other transportation, traffic signaling equipment, equipment used to control combustions or ex plosions, safety devices, elevators and escalators, devices related to electric power, and equipment used in finance - related fields. if you use product for unintended use, toshiba assumes no liability for product. for details, please contact your toshiba sales representative. ? do not disassemble, analyze, reverse - engineer, alter, modify, translate or copy product, whether in whole or in part. ? product shall not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited unde r any applicable laws or regulations. ? the information contained herein is presented only as guidance for product use. no responsibility is assumed by toshiba for a ny infringement of patents or any other intellectual property rights of third parties that may result from the use of product. n o license to any intellectual property right is granted by this document, whether express or implied, by estoppel or otherwise. ? absent a written signed agreement, except as provided in the relevant terms and conditions of sale for product, and to the maxim um extent allowable by law, toshiba (1) assumes no liability whatsoever, including without limitation, indirect, consequential, special, or incidental damages or loss, including without limitation, loss of profits, loss of opportunities, business interrupt ion and loss of data, and (2) disclaims any and all express or implied warranties and conditions related to sale, use of product, or information, including warranties or conditions of merchantability, fitness for a particular purpose, accuracy of informati on, or noninfringement. ? do not use or otherwise make available product or related software or technology for any military purposes, including without limitation, for the design, development, use, stockpiling or manufacturing of nuclear, chemical, or biol ogical weapons or missile technology products (mass destruction weapons). product and related software and technology may be controlled under the applicable export laws and regulations including, without limitation, the japanese foreign exchange and foreig n trade law and the u.s. export administration regulations. export and re - export of product or related software or technology are strictly prohibited except in compliance with all applicable export laws and regulations. ? please contact your toshiba sales representative for details as to environmental matters such as the rohs compatibility of product. please use product in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled su bstances, including without limit ation, the eu rohs directive. toshiba assumes no liability for damages or losse s occurring as a resul t of noncompliance w ith applicable laws and regulations.
|
